The flash dryer has the advantages of the small occupied area, low energy consumption, high thermal efficiency, and continuous mass production. What are the points that need to be paid attention to in the use of flash dryers?

  If the equipment is running for a long time or due to improper operation, there will be aggregates in some equipment, which will affect the normal operation. At this time, it is necessary to stop work for cleaning. For the cleaning of the aggregates in the drying tower, the cleaning door should be opened, the funnel-shaped bottom aggregate should be swept away with a long broom, the discharge valve should be opened, and the tower should be rinsed with tap water. To remove the dust in the cyclone separator, it is also necessary to open the cyclone separator, use a broom to clean the aggregate, and flush with water if necessary. For the cleaning of the bag filter, you should turn on the control switch, tap continuously, then open the cleaning door, tap the bag filter, and then replace the filter bag. For the cleaning of the slurry pipeline system, the drain valve of the two-way filter should be opened, the filter screen and the pipeline should be cleaned, and then the material pump should be turned on to replace the material with water, and the pump tube, the pressure regulator package and the pipeline.

  After a period of operation (usually about 600h), the flash dryer needs to be inspected and maintained. For the feeding system, check filters, pipes, valves, nozzles, etc., to see if there is any blockage, clean them regularly, and check the wear of nozzles for timely replacement. Check whether the material pump is leaking, whether the pressure is normal, whether the oil level is normal, etc. For fans, check whether the shafts and bearings are lack of oil to generate heat, whether there is vibration, noise, etc., and if necessary, clean the blades and balance the blades. For the heater, check whether the heat pipe is normal, and clean the filters at the oil pipe, oil pump, and oil nozzle if necessary. In addition, you should also pay attention to whether each motor has heat, vibration, abnormal sound, etc., and whether the meters and electrical appliances in the control cabinet work normally.

  Jiutian is a professional manufacturer of flash dryers, and the equipment has been exported to many countries and regions. If you are interested, please feel free to contact us.