Bentonite Clay Dryer is specially designed to dry the wet bentonite, and it is one kind of rotary drum dryer, mainly used for the drying of various types of clay mud, such as bentonite, kaolin, aluminum and iron clay. Bentonite is a water-bearing clay mineral material mainly composed of montmorillonite. Because of its special nature, such as swelling, adhesion, adsorption, catalytic, thixotropy, suspension, and cation exchange, bentonite is widely used in various industrial fields. Before being applied in various industries, bentonite must be dried in a bentonite dryer before it can be used. Jiutian® bentonite dryer is produced based on traditional technical upgrading. Compared with traditional bentonite dryers, our bentonite dryer holds a larger stuffing rate, the residence time is greatly reduced and the capacity of the bentonite dryer is greatly improved.
Materials:Bentonite Clay Dryer is widely used for drying bentonite, kaolin, clay, soil, diatomite, bauxite, etc.
Application:Efficient drying of bentonite with high moisture content, ensuring uniform heat transfer and stable continuous operation for industrial processing.
After wet bentonite enters the rotary drum, it passes through four drying zones. In the guiding zone, the material contacts high-temperature hot air for rapid surface evaporation and is transferred forward.
In the lifting and cleaning zone, lifting plates disperse the material into a curtain to enhance heat exchange. A built-in cleaning device removes material adhering to the inner wall and breaks up agglomerates, increasing drying efficiency.
In the inclined lifting zone, the material becomes loose and low in moisture, achieving full heat exchange until reaching the required moisture level.
Finally, in the discharge zone, the drum has no lifting plates, allowing the dried bentonite to roll smoothly to the outlet, completing the drying process.
| Equipment | Output (T/D) | Moisture content of raw material (%) | Final moisture content (%) | Total Power (kw) | Spatial footprint (m²) |
|---|---|---|---|---|---|
| JTHG1916 | 300 | 20-40 | 3-15 | 120 | 8*26 |
| JTHG2218 | 500 | 20-40 | 3-15 | 160 | 10*35 |
| JTHG2520 | 700 | 20-40 | 3-15 | 200 | 10*40 |
| JTHG2820 | 1000 | 20-40 | 3-15 | 290 | 12*40 |
| JTHG3430 | 1500 | 20-40 | 3-15 | 420 | 15*46 |
| JTHG4032 | 2000 | 20-40 | 3-15 | 500 | 15*50 |
| Note: The production capacity of the equipment is directly related to the proportion of mineral slag to reduce the moisture, the precipitation ratio is large, and the equipment production capacity is reduced accordingly. Specific consulting firm. | |||||
The internal material lifting device in the drum ensures thorough dispersion of bentonite and full contact with hot air, improving evaporation efficiency.
Specifically designed for high-moisture bentonite, effectively preventing sticking and clumping during the entire drying process operation.
High heat utilization rate reduces fuel consumption and operating costs.
Robust structure supports continuous production with a low failure rate.
From solution design to equipment manufacturing and on-site installation and commissioning, Jiutian provide complete one-stop services. The equipment is exported to over 100 countries including UK, Russia, Malaysia, the Philippines, Italy, Israel, Indonesia, Malaysia, Ethiopia, Nigeria, Congo, South Africa, Pakistan, India, Egypt, etc. Looking forward to cooperating with you. The following is the project site of our client.
WhatsApp
