In the wood processing, biomass energy, pulp and paper industries, the moisture content of wood chips directly affects product quality and production efficiency. High-efficiency and energy-saving wood chip dryers can effectively reduce the moisture content of wood chips, improve wood utilization, and meet environmental protection requirements. Jiutian wood chip dryer has become a popular choice in the industry for its high thermal efficiency, intelligent control, low energy consumption and multi-functional adaptability.
Rotary dryers are the most efficient wood chip dryers currently available. The wood chip raw materials are fed into the drum through screw conveyor, and the high temperature hot air is used to reduce the moisture content of the wood chips from 40% to less than 15%. After the drying process is completed, the dried biomass is collected and prepared for energy production or further processing. It is suitable for biomass briquetting plants, biomass power plants, biomass pellet plants and other industries. It has a short drying time, small footprint, and is very convenient to install and maintain.
Our wood chip dryer system can be used to dry any biomass material, such as agricultural waste, forestry waste, municipal solid waste, etc. The equipment has a high degree of automation and can be adjusted according to the characteristics, output, application requirements, etc. of each biomass material.
Materials:Widely used for drying sawdust, wood chips, pasture, wood shavings, straw and other materials etc.
Application:Drying wood chips for biomass fuel, pelletizing, and board manufacturing.
Material enters the inner layer of the rotary drum for downstream drying. As the drum rotates, lifting plates continuously raise and disperse the material, enabling spiral heat exchange. It then moves into the middle layer for countercurrent drying, where repeated lifting extends the retention time and allows the material to fully absorb heat from both the inner and middle drums, reaching an optimal drying state.
Finally, the material falls into the outer layer, traveling in a multi-loop path. Properly dried material is quickly discharged under hot air flow, while wetter material remains longer due to its weight until fully dried, ensuring uniform and efficient drying.
| Model | Capacity(t/d) | Vaporization capacity(t/h) | Early moisture(%) | Final Moisture(%) | Drying Temperature(℃) | Power(kw) | Total weight(kg) | Cover Area(m²) |
|---|---|---|---|---|---|---|---|---|
| JTTG1210 | 44.0-19.5 | 0.565 | 35-50% | 12-15% | 270±30℃ | 28 | 13500 | 5m×15m |
| JTTG1409 | 46.5-20.5 | 0.595 | 34 | 15500 | 5m×15m | |||
| JTTG1615 | 88.0-39.0 | 1.130 | 45 | 19500 | 6m×22m | |||
| JTTG2010/3 | 144.5-63.5 | 1.850 | 78 | 25000 | 8m×18m | |||
| JTTG2210/3 | 154.0-67.5 | 1.976 | 85 | 27000 | 8m×18m | |||
| JTTG2510/3 | 193.0-83.5 | 2.427 | 110 | 35000 | 10m×18m | |||
| JTTG2512/3 | 227.0-100.0 | 2.912 | 125 | 38000 | 10m*20m | |||
| JTTG2912/3 | 268.0-120.0 | 3.432 | 135 | 43500 | 10m*22m |
One-button intelligent control with automatic parameter adjustment keeps the dryer running in optimal condition and ensures uniform, stable final moisture.
Self-insulated drum structure improves thermal efficiency to over 70%, more than 30% higher than traditional single-drum dryers, with exhaust temperature below 50℃.
Four-wheel drive ensures smooth and reliable transmission, while the compact layout reduces floor space and civil construction cost by about 50%.
Automatic impurity and iron removal, variable frequency control, modular dust collection and heat recovery reduce fuel consumption by 30% and power consumption by 20%.
From solution design to equipment manufacturing and on-site installation and commissioning, Jiutian provide complete one-stop services. The equipment is exported to over 100 countries including UK, Russia, Malaysia, the Philippines, Italy, Israel, Indonesia, Malaysia, Ethiopia, Nigeria, Congo, South Africa, Pakistan, India, Egypt, etc. Looking forward to cooperating with you. The following is the project site of our client.
WhatsApp
