Fly ash dryer is also known as the three-layer drum dryer, is developed and manufactured on the basis of the single drum dryer. At present, the three-cylinder dryer produced by Jiutian company has mature technology, and has a good drying effect on fly ash, coal ash, pond ash, bottom ash, etc., widely used in construction, building materials, water and electricity, etc. industry. Jiutian fly ash dryer has the characteristics of compact structure, small footprint, reliable operation, low energy consumption, high thermal efficiency, good drying effect, and operator saving.
Materials:Fly ash dryer is used for drying fly ash, pond ash, coal ash, bottom ash, etc.
Application:Drying fly ash for cement, construction, and industrial reuse.
Fly ash are sent to the feeder by belt feeding machine, then transport from the feeding machine to drying drum, the fly ash is stirred by shoveling plate in the drying drum, even disperse to make fully contacting with hot air, to reach the goal of transferring heat for drying. At last, the fly ash finished products is sent out through the discharging machine in the end of drum, then through the belt discharging to arrive the finished products area, completing the whole drying process.
| Model(m) | Output(t/h) | Coal consumption(kg/t) | Total power(kw) | ||
|---|---|---|---|---|---|
| River sand | Fly ash | Mineral slag | |||
| Φ2.0×5 | 12-15 | 6-7 | 10-13 | 10-12 | 4kw×2 |
| Φ2.2×5 | 14-18 | 7-9 | 12-15 | 10-12 | 5.5kw×2 |
| Φ2.5×5 | 23-28 | 10-13 | 20-22 | 10-12 | 5.5kw×4 |
| Φ2.8×6 | 30-35 | 15-18 | 25-30 | 10-12 | 5.5kw×4 |
| Φ3.0×6 | 35-40 | 18-20 | 32-35 | 8-10 | 7.5kw×4 |
| Φ3.0×7 | 40-45 | 20-25 | 35-40 | 8-10 | 7.5kw×4 |
| Φ3.2×7 | 45-50 | 25-30 | 40-45 | 8-10 | 11kw×4 |
| Φ3.2×8 | 50-55 | 30-35 | 45-50 | 8-10 | 11kw×4 |
| Φ3.6×8 | 60-70 | 35-40 | 60-65 | 6-8 | 15kw×4 |
| Φ3.8×9 | 70-80 | 40-45 | 70-75 | 6-8 | 15kw×4 |
| Φ4.0×10 | 90-100 | 45-50 | 80-90 | 6-8 | 18.5kw×4 |
| Φ4.2×8.5 | 80-100 | 45-60 | 80-90 | 6-8 | 18.5kw×4 |
Made of high-strength alloy steel plates with 3–4 times higher wear resistance than ordinary steel, ensuring over 10 years of stable service life.
Reduces moisture from 15–25% to 0.5–5%, ideal for power plants, cement plants, brick factories, slag powder and dry-mix mortar production lines
Thermal efficiency reaches up to 80% with low total power consumption, saving about 40% energy and significantly reducing energy cost.
Fuel options include coal, oil and gas. Compact design reduces floor space by about 40% and civil investment by 50%, with good sealing and discharge temperature below 50℃ for direct storage.
From solution design to equipment manufacturing and on-site installation and commissioning, Jiutian provide complete one-stop services. The equipment is exported to over 100 countries including UK, Russia, Malaysia, the Philippines, Italy, Israel, Indonesia, Malaysia, Ethiopia, Nigeria, Congo, South Africa, Pakistan, India, Egypt, etc. Looking forward to cooperating with you. The following is the project site of our client.
WhatsApp
