Manure is a byproduct of poultry farming, rich in nutrients such as nitrogen, phosphorus, and potassium. After proper treatment, manure can be turned into a fertilizer with great market value, creating added value for poultry farms. Jiutian chicken manure dryer is the basic equipment for chicken manure utilization. It can dry and process chicken manure into renewable energy and use it as fertilizer and feed. The entire drying process is closed and will not cause any pollution to the environment.
The fermentation process has the functions of heating, insecticide, deodorization, and nutrient enrichment. The moisture content of fermented chicken manure is less than 40%. However, considering the long-term storage and production of granular organic fertilizer, the moisture content of dry chicken manure must be less than 15%, so professional drying equipment is needed to dry chicken manure fertilizer.
Jiutian chicken manure dryer can quickly dry chicken manure to make the dry matter content reach 80-85%. The dust removal system can effectively remove dust and eliminate odor without pollution to the environment. Chicken manure dryer is suitable for drying materials with a moisture content of 40-80% such as chicken manure, cow manure, sludge, waste water, etc. We can also design and provide a complete poultry manure drying system according to the actual needs of customers.
Materials:Widely used for drying chicken manure, cow dung, poultry manure, and other farm wastes, etc.
Application:Drying chicken manure to reduce odor and improve fertilizer value.
Drying Process:
Manure with 75–85% moisture is first dewatered to about 65%, then conveyed into a mixing rotary drum dryer for downstream drying. As the drum rotates, lifting flights continuously raise and disperse the material, maximizing heat exchange with hot air for rapid moisture evaporation. The drum structure ensures sufficient drying time and prevents material buildup, while an internal cleaning device avoids sticking.
Air Flow Process:
Air is heated in the hot air furnace to 600–850°C and drawn into the dryer by an induced draft fan. After three-layer heat exchange, the temperature drops to 55–65°C before discharge. Exhaust gas is purified through a cyclone and wet dust collector to meet emission standards.
| Model | capacity(t/d) | evaporation capacity(t/h) | raw material moisture(%) | dry materail moisture(%) | Drying Temperature (℃) | motor power(kw) | weight(ton) | area(m²) |
|---|---|---|---|---|---|---|---|---|
| JTJG1408 | 31 | 0.70 | 60±5% | 12-15%(adjustable) | 350±50℃ | 40 | 17 | 5×14m |
| JTJG1610 | 45 | 1.00 | 55 | 21.5 | 6×16m | |||
| JTJG2010 | 87.5 | 2.15 | 95 | 26.5 | 8×16m | |||
| JTJG2010/3 | 104 | 2.30 | 100 | 28.5 | 8×16m | |||
| JTJG2210/3 | 122 | 2.70 | 125 | 37 | 10×16m | |||
| JTJG2510/3 | 150 | 3.30 | 145 | 41 | 10×18m | |||
| JTJG2512/3 | 181 | 4.00 | 165 | 45.5 | 10×20m |
Automatic and intelligent control system adjusts operating parameters in real time, keeping the dryer in optimal condition and ensuring uniform, stable final moisture.
Unique flight design continuously lifts and tumbles materials, maximizing heat transfer, increasing output by over 50% and reducing fuel consumption by more than 30%.
Four-wheel drive ensures smooth and reliable transmission, while the compact structure reduces floor space and civil investment by about 40%, and equipment cost by 20%.
Optimized internal structure, frequency control and modular dust collection with heat recovery keep exhaust temperature below 50℃, cutting energy consumption by 30% and power use by 20%.
From solution design to equipment manufacturing and on-site installation and commissioning, Jiutian provide complete one-stop services. The equipment is exported to over 100 countries including UK, Russia, Malaysia, the Philippines, Italy, Israel, Indonesia, Malaysia, Ethiopia, Nigeria, Congo, South Africa, Pakistan, India, Egypt, etc. Looking forward to cooperating with you. The following is the project site of our client.
WhatsApp
