Coal steam drying drum dryer belongs to indirect heating mode, the heat conduction oil or steam drying heat, this type of dryer has low energy consumption of drying, the safety drying process, the material is not affected by heat source pollution etc.,which are widely used in the biomass, food, feed, fertilizer, bad slag chemical industry, medicine, coal, mining and other small particles or weakly caking dry powder material.
Heat conduction oil steam drum dryer, mainly composed of tube type heat exchanger, heat sources in and out center pipe, rotary drum, feeding and discharger of the machine, induced draft fan, dust collector and distribution cabinets.Wet material enters into the dryer, uniformly distributed in the roller feed plate and the column tube turning, with a full contact with hot conduction oil (steam) tube type heat exchanger, realizing heat transfer, mass transfer (110-250 ℃), constant temperature drying, water vaporization and scattered with the air emissions, gradually reduce the moisture from the material, the material has finished the drying process.
Materials:Widely used for drying coal, lignite, carbon coal, coal slime, coking coal, gas coal, etc.
Application:Low-temperature steam drying of coal to enhance safety and energy efficiency.
Heat conduction oil steam rotary dryer, mainly composed of tube type heat exchanger, heat sources in and out center pipe, rotary drum, feeding and discharger of the machine, induced draft fan, dust collector and distribution cabinets.Wet material enters into the dryer, uniformly distributed in the roller feed plate and the column tube turning, with a full contact with hot conduction oil (steam) tube type heat exchanger, realizing heat transfer, mass transfer (110-250 ℃), constant temperature drying, water vaporization and scattered with the air emissions, gradually reduce the moisture from the material, the material has finished the drying process.
| Model | Capacity（T/D） | Initial moisture（%） | Final moisture（%） | Total Power（kw） | Covering area（m²） |
| JTMG1916 | 300 | 30-60 | 17±5 | 120 | 8*26 |
| JTMG2218 | 500 | 30-60 | 17±5 | 160 | 10*35 |
| JTMG2520 | 700 | 30-60 | 17±5 | 200 | 10*40 |
| JTMG2820 | 1000 | 30-60 | 17±5 | 290 | 12*40 |
| JTMG3430 | 1500 | 30-60 | 17±5 | 420 | 15*46 |
| JTMG4032 | 2000 | 30-60 | 17±5 | 500 | 15*50 |
| Note: the capacity of equipment is directly related to the reduction of water content of coal. The proportion of precipitation is large, and the production capacity of equipment decreases correspondingly. Specific consulting Jiutian company. | |||||
Utilizes a closed-loop heating system with hot oil or steam, achieving 300°C heat exchange and reducing energy consumption by 20-40% compared to conventional dryers.
Indirect heating ensures no direct contact between heat source and materials, maintaining product purity in a fully enclosed drying process.
Four-wheel driving ensures stable operation, while the compact design significantly reduces footprint and civil construction investment by about 50%.
Features a robust rotating drum design with smooth material flow and minimal resistance, ensuring continuous, reliable operation with easy maintenance.
From solution design to equipment manufacturing and on-site installation and commissioning, Jiutian provide complete one-stop services. The equipment is exported to over 100 countries including UK, Russia, Malaysia, the Philippines, Italy, Israel, Indonesia, Malaysia, Ethiopia, Nigeria, Congo, South Africa, Pakistan, India, Egypt, etc. Looking forward to cooperating with you. The following is the project site of our client.
WhatsApp
