Electroplating sludge drying equipment is a commonly used equipment in the drying industry. When purchasing electroplating sludge drying equipment, users usually need to configure and design appropriate equipment according to the nature of the material and the requirements for output and drying effect. For the electroplating sludge drying equipment system, attention should also be paid to the material and process type of the equipment, so as to better ensure the drying efficiency and quality, and bring greater profits to the enterprise. The system structure of common electroplating sludge drying equipment on the market is as follows: heating equipment, electroplating sludge drying equipment, dispersing device, lifting plate device, supporting device, conveying device, waste gas treatment equipment, etc. Next, we will briefly introduce the structure of the electroplating sludge drying equipment system.

  1. Heating equipment

  The heating equipment transfers heat energy to the electroplating sludge drying equipment by burning fuel. Users can choose natural gas, biomass fuel, steam, boiler waste heat, oil and other fuels as heat sources. The range of options is very wide. When choosing fuels, they can adapt to local conditions. It is decided by comprehensive consideration of the degree of accessibility, fuel calorific value, economy, environmental protection and other aspects.

  2. Electroplating sludge drying equipment

  The barrel of the electroplating sludge drying equipment is composed of three layers of rollers nested with each other, and the material is mostly stainless steel. The manufacturer will customize the appropriate equipment model and size for users according to the characteristics of the materials handled by different users, the requirements of the output, the requirements of the degree of drying, etc. Generally speaking, the three-cylinder electroplating sludge drying equipment occupies less area, the drying output is large, and the heat energy utilization rate is high. It is widely used in various industries. At the feed end of the dryer cylinder, in order to prevent material from being dumped, a material stopper and a material guide plate are installed.

  3. Breaking device, lifting plate device

  The dispersing device and the material lifting plate device are important parts in the barrel of the electroplating sludge drying equipment, which can greatly increase the contact area between the material and the high-temperature flue gas and improve the heat exchange capacity. Under normal circumstances, the dispersing device can break the materials entering the cylinder into bulk, and the lifting plate device continuously lifts and scatters the materials so that they can fully contact with the hot air. At present, the lifting board is divided into L-shaped lifting board, honeycomb lifting board, fan-shaped lifting board, etc. According to the needs of different production lines, the form of the lifting board device is different.

  4. Waste gas treatment equipment

  Generally speaking, electroplating sludge drying equipment manufacturers will design waste gas treatment plans according to the needs of enterprise users, install suitable waste gas treatment equipment in the drying production line, and use different waste gas treatment processes and various waste gas treatment equipment to achieve the purpose of purifying waste gas, emission standards.

  5. Other auxiliary devices

  The electroplating sludge drying equipment adopts the friction transmission of the supporting roller and the wheel belt, and the transmission power is low, which reduces the noise during the operation of the equipment. The sealing system adopts micro-contact technology, the sealing effect is better, and dust pollution is reduced.

  Zhengzhou Jiutian is a professional manufacturer of sludge dryers. Our equipment can dehydrate and dry all kinds of sludge, and can be customized according to your needs such as output. If you need it, please feel free to contact us.