When using the vinasse dryer, due to the high water content of the distiller’s grains and the long-term high temperature working environment, it is more corrosive to the host, and other accessories will be corroded by the natural environment. In this case, if you want to improve the service life of the distiller's lees dryer, you must do a good job of maintenance, and if the maintenance is done well, the efficiency of the distiller's dried grains will be improved.

  The maintenance of the vinasse dryer is divided into internal and external parts, the internal maintenance workload is relatively small, and generally does not require maintenance. The internal problem is that the lifting plate falls off. The maintenance content is very simple. Regularly stop the machine to check whether the soldering of the lifting plate is firm. If there is loose or skewed, correction and welding should be carried out to avoid falling off in later use. The external maintenance workload is large, and the maintenance is more complicated. External maintenance is mainly on the cylinder, iris, supporting wheel and other parts, these parts are prone to problems, not only do they need to be checked regularly during daily production, they also need to be calibrated after shutdown. For large-scale equipment, starting up once and then shutting down will not only delay production, but also waste a lot of costs. Therefore, multiple parts need to be maintained after one shutdown.

  Many customers often neglect to maintain the vinasse dryer for production and profit. In fact, this often loses profits in the future. The equipment is damaged because it is not well maintained. At that time, it will not only be a loss of shutdown, but also need to spend a certain amount of money to repair the equipment.

  Zhengzhou Jiutian is a professional manufacturer of brewers grain dryers, if you want to know more information, please feel free to contact us.