Focus on heavy equipment
The cow dung dryer is mainly a drum-type structural design, which can dry a large amount of cow dung materials containing moisture. The drying process has a high output, and the dried materials have good appearance and high utilization value. So what is the configuration of the cow dung dryer production line and the drying process?

The drying treatment of materials by the cow dung dryer requires the cooperation of the entire production line. The configuration of the equipment production line is as follows:
It is composed of heat source device, dryer host, dust removal equipment, induced draft fan, power distribution cabinet and other accessories.
Cow dung dryer drying process:
The cow dung dryer mainly realizes the drying process of the material by contacting the material with high-temperature hot air. The material containing moisture enters the drum of the dryer through the conveyor. Under the action of the lifting plate device installed in the drum of the dryer, the contact area between the material and the high-temperature hot air is further increased, and the drying time of the material is reduced. Coupled with the continuous rotation of the dryer drum, the material continues to advance until the dried material is discharged from the discharge port, and the material drying process is completed.
Zhengzhou Jiutian is a professional dryer manufacturer. Our equipment can not only dry animal manure, but also dry other waste materials. If you want to learn more, please contact us.
Coffee grounds are the residue produced after brewing coffee. More than 2 billion cups of coffee are consumed worldwide every day, and most of the coffee grounds are discarded as garbage. The decomposition of coffee grounds releases methane into the atmos
Livestock farms generate a large amount of pollutants every day, including cow dung, urine, and other contaminants, with a moisture content ranging from 85% to 90%. These pollutants contain a substantial amount of undigested organic matter and insect eggs
Empty fruit bunches (EFB) are fibrous agricultural waste left over from palm oil extraction and can be processed into biomass fuel. The initial moisture content of palm fruit bunches is usually high (55-65%), and the moisture needs to be reduced to 15% be
Sawdust pellets are a type of biomass fuel with high density and high calorific value, it can replace traditional fossil fuels, reduce pollution, and achieve resource recycling. To produce sawdust pellets, drying is usually an indispensable step, because