Focus on heavy equipment
The slag contains a certain amount of water. In order to fully utilize the slag, it is necessary to dry the slag. For slag drying treatment, the fastest way to reduce moisture is to use mineral slag dryer.
The slag dryer is mainly designed and produced for the characteristics of slag. It can dry a large amount of slag. The drying time is short, the drying degree is uniform, and the drying effect is good. The slag dryer mainly uses heat transfer to dry slag with different moisture content. The moisture of the dried slag is greatly reduced and can be fully utilized comprehensively.
The slag dryer has the following advantages:
1. The processing output is high, the slag dryer can process a large amount of slag materials every day, and the work efficiency is high.
2. The equipment runs stably and can run continuously for production. The slag dryer can produce continuously for 24 hours, and the probability of equipment failure is low.
3. Energy saving and environmental protection. The slag dryer is an environmentally friendly drying equipment, which causes less pollution to the environment and consumes less combustion.
4. The material dried by the slag dryer has a uniform drying degree and a good drying effect
Our mineral slag dryer have been exported to many countries. Welcome to visit our factory!
Recently, the equipment for the continuous carbonization machine project cooperated by Inner Mongolia customers and Zhengzhou Jiutian has been installed and is about to be put into production.
Wood shavings are the most common animal bedding material due to their use in absorbency and odor control. However, the production process of shavings produces dust and grease, which can cause problems for animals. Therefore, the shavings must be dry to e
Recently, the coal slime dryer equipment customized by Zhengzhou Jiutian for customers in Yangquan, Shanxi was hoisted in the Jiutian workshop and will be shipped soon.
The steam rotary dryer is also called a tube dryer. The heat source is waste heat steam from power plants and boiler plants. Through technological transformation, it is converted into the temperature and heat energy required by the material. It has the ad