Focus on heavy equipment
Focus on heavy equipment
There are many choices of heat source for cocopeat dryer, such as biomass particles, coal, firewood, steam, natural gas, biogas, boiler flue gas, etc. So which heat source is better?
First of all, we consider the convenience of the heat source, that is, whether the heat source is easy to obtain and whether it is convenient to purchase. It can be selected according to the actual situation of the dryer.
Secondly, considering the calorific value and cleanliness of the heat source, fuels with high calorific value and high cleanliness can provide more heat and reduce the burden of subsequent exhaust gas treatment.
Finally, we also need to analyze the specific drying cost of the heat source, and calculate the theoretical value according to the required heat and the calorific value of the heat source for a simple comparison.
All in all, no matter what material is being dried, the principles of heat source used in the dryer should be comprehensively considered in terms of convenience, high calorific value, and low drying cost.
Coffee grounds are the residue produced after brewing coffee. More than 2 billion cups of coffee are consumed worldwide every day, and most of the coffee grounds are discarded as garbage. The decomposition of coffee grounds releases methane into the atmos
Livestock farms generate a large amount of pollutants every day, including cow dung, urine, and other contaminants, with a moisture content ranging from 85% to 90%. These pollutants contain a substantial amount of undigested organic matter and insect eggs
Empty fruit bunches (EFB) are fibrous agricultural waste left over from palm oil extraction and can be processed into biomass fuel. The initial moisture content of palm fruit bunches is usually high (55-65%), and the moisture needs to be reduced to 15% be
Sawdust pellets are a type of biomass fuel with high density and high calorific value, it can replace traditional fossil fuels, reduce pollution, and achieve resource recycling. To produce sawdust pellets, drying is usually an indispensable step, because
