Focus on heavy equipment
If the sludge is not treated in time, it will not only cause environmental pollution, but also waste resources. However, traditional drying methods and mechanical dehydration methods have problems such as large footprint, small processing capacity, and uneven drying and wetness. At present, the common sludge drum dryer on the market adopts high temperature drying technology, which has good heat and mass transfer effect and large processing capacity. How to increase the output of sludge drum dryer?
1. Control the moisture content during the feeding process.
The combined state of sludge and moisture is one of the main factors determining the drying yield. When the sludge moisture content is low, less heat source is consumed, and the material stays in the sludge drum dryer for a short time, thereby ensuring that the sludge drying yield is improved. Correspondingly, for the sludge with large particle size and high water content, the drying time is prolonged, and the working efficiency of the equipment is reduced, resulting in a decrease in the output of the sludge drum dryer. Therefore, when feeding, pay attention to check whether the moisture content of the sludge is too high and whether it is within the specified range.
2. Select the appropriate sludge drum dryer technology.
Different drying equipment suppliers use different drying technologies. For example, there are belt type, vertical type, single drum type, double cylinder hinged tooth steam utilization sludge drum dryer, etc. The sludge drum dryer equipment is suitable for large and medium-sized sludge drying projects, and has the characteristics of strong production capacity and high utilization rate of heat energy.
3. Configure the appropriate device model
Generally speaking, the larger the model of the sludge drum dryer, the better the equipment configuration and the higher the output. But it's important to note that the bigger the model, the better. The model of the equipment needs to be consistent with the actual production needs in order to achieve a good drying effect. If the model is too large, it will cause waste of thermal energy. If the model is too small, it cannot meet the production requirements.
4. Do daily maintenance
In order to increase the output of the sludge drum dryer, it is necessary to do daily equipment maintenance. After long-term operation of the equipment, some easily worn parts and fasteners may be damaged or loosened, especially if the sludge drum dryer equipment works in harsh environments for a long time or is often overloaded, it will seriously affect the sludge drum dryer. output of the machine. Therefore, daily maintenance of the equipment and early detection and resolution of problems can effectively avoid the decline in the output of the sludge drum dryer.
The above are some knowledge about improving the output of sludge dryer, if you want to know more technical questions, please feel free to contact us.
Recently, the equipment for the coal slime drying project cooperated by Guizhou Jinsha customers and Zhengzhou Jiutian has been installed and debugged, and has been successfully put into operation, helping local high-value, green, and resource-based reuse
Lignite is a type of coal that contains relatively high amounts of moisture and ash. The utilization value of lignite is relatively low, but through upgrading processes, lignite can be converted into fuels with more economic value.
Cow dung rotary dryer is an important agricultural machinery and equipment, mainly used to dry cow dung in order to convert it into organic fertilizer or biomass energy. This equipment has many advantages, such as high efficiency, low energy consumption,
Empty palm fruit bunches are the main waste produced by palm oil mills after palm fruit is squeezed for oil. Using palm waste as raw material, through pretreatment and processing, it is solidified and extruded into high-density pellet fuel, which can not