Focus on heavy equipment
There are two ways to dry bamboo chips, one is natural drying and the other is mechanical drying. The effect of the traditional drying method is uneven as a whole. The position near the tuyere dries quickly, and the position away from the tuyere dries slowly, so it needs to be replaced halfway.
With the development of the market and the continuous development and improvement of the technology, the bamboo chips dryer produced by Zhengzhou Jiutian can not only effectively improve product quality, solve key problems such as deformation, cracking, mildew and deterioration in the production process of the required process, but also obtain Higher economic benefit. So what is the use of bamboo chips after drying?

Bamboo chips are mainly used for the following purposes:
1. The dried bamboo chips can be made into biomass pellet fuel, which is a clean energy solid fuel.
2. Bamboo chips after drying can also be made into mosquito coils and Buddha incense.
3. Sent to paper mills to be used as paper-making fillers, etc.
4. Bamboo chips after drying can be sent to furniture factories to make compressed boards.
If you need to buy a bamboo chip dryer, please feel free to contact us.
Pulp is the raw material for making paper and cardboard, which is a fiber material made from plants (such as wood, cotton, agricultural waste) or recycled paper, and is formed by decomposing and mixing with water. Wet pulp is a fiber suspension with high
In sugarcane sugar factories, after extracting sugar from sugarcane juice, the remaining sugarcane bagasse can be used as fuel for power plants or boilers. Sugarcane bagasse usually contains 48% to 52% moisture, and due to the energy consumption required
As ethanol production increases, the supply of distiller's grains also increases. Distilled grains are waste produced by distilleries after alcohol production, containing a high amount of fiber and protein, with protein content ranging from 25-35%. After
The steam tube rotary dryer is a type of rotary dryer, which consists of a tube heat exchanger, inlet and outlet center tubes, rotating drum, feeding and discharging devices, induced draft fan, dust collector, and distribution cabinet. Unlike traditional