Focus on heavy equipment
Focus on heavy equipment
Compared with the feed dregs rotary dryer, the Yeast Dryer has a large difference in the drying principle. It belongs to indirect drying. It uses a single drying cylinder structure and indirect conduction heating to dry a variety of slurry, and the drying cylinder rotates for one week. It can be completely dried. It is an important dewatering and upgrading equipment for drying various feeds yeast.
Feed yeast is a yeast cell used as a feed for livestock and poultry. A light yellow or brown powder or granule with high protein content and rich vitamins. The composition varies with raw materials and strains. Raw material feed yeast has high moisture content, and transportation and storage are difficult to teach. The feed yeast dryer has high dehydration ability, and the dry material has high cleanliness, and the taste of the fermented feed is well preserved.
Jiutian Yeast Drying Production Line, which has accumulated more than ten years of operation, both in technology and in enterprise service quality and market reputation, is a better cooperation choice for enterprises. Welcome to the online consultation and come to the factory to negotiate.
Pulp is the raw material for making paper and cardboard, which is a fiber material made from plants (such as wood, cotton, agricultural waste) or recycled paper, and is formed by decomposing and mixing with water. Wet pulp is a fiber suspension with high
In sugarcane sugar factories, after extracting sugar from sugarcane juice, the remaining sugarcane bagasse can be used as fuel for power plants or boilers. Sugarcane bagasse usually contains 48% to 52% moisture, and due to the energy consumption required
As ethanol production increases, the supply of distiller's grains also increases. Distilled grains are waste produced by distilleries after alcohol production, containing a high amount of fiber and protein, with protein content ranging from 25-35%. After
The steam tube rotary dryer is a type of rotary dryer, which consists of a tube heat exchanger, inlet and outlet center tubes, rotating drum, feeding and discharging devices, induced draft fan, dust collector, and distribution cabinet. Unlike traditional
