Focus on heavy equipment
Focus on heavy equipment
The clean coal dryer ordered by Shaanxi Shenmu customer from Zhengzhou Jiutian has successfully arrived at the project installation site, and the entire production line is currently under hot installation.
The clean coal dryer adopts the method of direct contact between the material and the high-temperature hot air to realize the drying treatment of the clean coal material. The clean coal dryer adopts a special dispersing device, which can break up and separate the large pieces of clean coal materials that are bonded together, and then dry them, which increases the contact area between the materials and high-temperature hot air, and clean coal materials containing moisture reduced to about 10%. Clean coal dryer equipment has strong overload resistance, large processing capacity, low fuel consumption, good drying effect and low cost. It can run production work continuously, with a high degree of mechanization and automatic production.
Zhengzhou Jiutian specializes in the production of various coal and slime dryer equipment, if you are interested in, please contact us.
Coffee grounds are the residue produced after brewing coffee. More than 2 billion cups of coffee are consumed worldwide every day, and most of the coffee grounds are discarded as garbage. The decomposition of coffee grounds releases methane into the atmos
Livestock farms generate a large amount of pollutants every day, including cow dung, urine, and other contaminants, with a moisture content ranging from 85% to 90%. These pollutants contain a substantial amount of undigested organic matter and insect eggs
Empty fruit bunches (EFB) are fibrous agricultural waste left over from palm oil extraction and can be processed into biomass fuel. The initial moisture content of palm fruit bunches is usually high (55-65%), and the moisture needs to be reduced to 15% be
Sawdust pellets are a type of biomass fuel with high density and high calorific value, it can replace traditional fossil fuels, reduce pollution, and achieve resource recycling. To produce sawdust pellets, drying is usually an indispensable step, because
