The sea sand enters the guide plate of the dryer from the feeder through the chute. As the cylinder rotates, the sea sand is guided to the inclined lifting plate and then lifted to the center of the cylinder, and gradually falls to form a material curtain. The high-temperature air flows through it, preheating the sea sand and evaporating part of the water. When the sea sand is scattered and moved to the movable grate wing, the material is mixed with the preheated grate wing, which transfers heat to the material and makes part of the water evaporate. At the same time, the material entrained by the wing plate is lifted and scattered, repeated many times, and the material exchanges convection and contact heat with the hot air flow. At the same time, the cleaning device buried in the material also slides down the inner side of the arc-shaped lifting plate to clean the material adhering to the inner wall of the lifting plate. After the cleaning device turns the vertical line along with the cylinder, it is dragged on the back of the arc hoisting plate to clean the materials adhered to the outer wall of the hoisting plate. With the continuous rotation of the cylinder, part of the water evaporates and the sea sand is further dried. At the same time, the sweeping device also played a role in breaking the sea sand balls, increasing the drying speed. After the sea sand dries, it becomes a loose material with low moisture and is discharged from the discharge port.

  How much is a sea sand dryer? First of all, customers should know how to set the factory price, because the raw materials, labor, and daily operations of the company are different in different regions. There will also be discrepancies in prices; because Zhengzhou Jiutian is a professional manufacturer specializing in the production of dryers, we have no intermediate agents, which greatly improves the interests of customers! To get a quote, please contact us online!