Wet bean dregs can be processed into protein feed after dehydration and drying, which can increase profits for enterprises and avoid polluting the surrounding environment. However, the okara dryer is used as a large-scale mechanical equipment in the farm, and sometimes the material does not meet the standard during the drying process. what is the reason?

  1. Feed particle size

  For the bean dregs dryer for farms, the granularity of materials that can be processed by different types and specifications of bean dregs dryer equipment for farms is also different. If the feed particle size is not suitable, the finished product will not meet the standard. If the feed particles are too small, the content of needles and flakes in the finished product will be greatly reduced. Therefore, in order to ensure the drying effect of the finished product, the feed particle size needs to meet the requirements of the dryer equipment.

  2. Cyclic load adjustment

  Since the drying process of okara is carried out in a closed cycle, the load in the cycle will increase, so that the dried finished granules are well deformed. However, increasing cyclic loads also increases wear among the various equipment components in the system. Therefore, it is very important to adjust the cyclic load in production.

  3. Keep the feeding speed constant

  Equipped with the right amount of professional operators, it helps to improve work efficiency and finished product quality. For example, when feeding, the operator should try to maintain the speed and uniformity of the feed. If the feeding amount of the bean dregs dryer used in the farm is too much or too little, it will have a great impact on the quality of the finished product. Too much feed will easily cause blockage and insufficient drying, and too little feed will cause waste of heat source. Therefore, during the feeding process, the operator should maintain the feeding stability of the bean dregs dryer used in the farm.

  Zhengzhou Jiutian is okara dryer manufacturer, if you are interested in our equipment or if you have any questions, please feel free to contact us.