According to market demand, Zhengzhou Jiutian has developed the production line equipment of raw material pellet fuel, which is suitable for wood chips, sawdust, bamboo chips, wooden shavings, shavings, barley straw, oat straw, wheat straw, rye straw, rice straw, sorghum straw, corn stalks, potato vines, bean stalks, peanut vines and other materials with a moisture content of 35-65% are dried and formed. According to the characteristics of each biomass material, output size, application requirements, cost control, degree of automation, on-site working conditions, etc., optimize the drying and forming process technology.

  The production process of a complete set of equipment for the biomass pellet production line:

  Raw material collection: There are many raw materials for the pellet machine, such as crop stalks, fruit shells, tree bark, sawdust, etc. Before production, it is necessary to store enough raw material requirements for at least one week to avoid delaying normal production. At the same time, the stored raw materials must do a good job of safety: fire and rain.

  Raw material crushing: When the granule machine is granulated, the requirement of the raw material is 3-5MM, so the raw materials we collect need to be crushed except for the sawdust. Depending on the size of the raw material, we can choose a cutter head shredder or a hammer shredder.

  Raw material drying: The biomass pellet machine is very strict with the moisture content of the raw materials, and the moisture cannot be higher than 18%. If the water content is too large or lack of water, the pellets will be broken but not formed.

  Raw material conveying: In order to save labor, we generally configure a conveying equipment. The processed raw materials are sent to the feed port of the granulator through a conveyor.

  Raw material granulation: The biomass pellet machine is the most important equipment of the entire production line. According to the output and use, the pellet machine has two categories: flat die and ring die.

  Particle cooling: The temperature of freshly produced biomass particles is as high as 80 or 90 degrees. If bagging at this time will cause a fire, it must be cooled to room temperature by a cooler before bagging and storing.

  Granule packaging: The cooled and complete granules are conveyed to the packaging machine by a conveyor, and the packaging machine measures and packs them into bags, and finally sends them to the finished product warehouse. Then it can be sold directly.

  Zhengzhou Jiutian customizes and produces a complete set of biomass pellet fuel production line, which is affordable, durable, high-yield, environmentally friendly, low-consumption, high-forming rate, stable performance, pellet fuel resistant to fever and high calorific value. Welcome to contact us for more information.