What equipment does a biomass pellet production line process include? This depends on the actual conditions of production capacity and processed materials. General biomass pellet production lines include crushers, shredders, dryers, wood pellet machines, coolers, packaging machines and other equipment.

  Process flow of biomass pellet production line:

  1. Crusher: The main function is to initially process irregular forestry waste such as logs and wood scraps into blocks or strips that are conducive to crushing (if the raw materials are like wood chips, you can skip this step).

  2. Shredder: Wood chips or other small pieces can be further reduced with a shredder.

  3. Drying machine: The material enters the cylinder body from the upper part of the drying cylinder through the feeding port seal head, the motor drives the drying cylinder to rotate, and the wet material entering the drying cylinder is repeatedly picked up and thrown off by the copy board on the wall of the drum. . With the help of hot air and the rotation of the drying cylinder, it plays the role of drying materials. The dried materials are unloaded through the discharge air-locking device, and the fan is connected to Shakron to remove dust.

  4. Sawdust pellet machine: The raw material falls into the feed port vertically, and the material is evenly distributed on the surface of the inner cavity of the mold by the rotation of the press wheel. Under the rolling of the press roller, the powdery material passes through the hole of the mold, and the powdery material constantly forms a cylindrical solid body, which is convenient for transportation and combustion.

  5. Cooling machine: When the finished particles leave the pellet machine, they are very hot and will release water vapor. Therefore, it must be cooled and dried.

  6. Baler: At this step, the pellets have been completed and are ready for use. But in most cases, storage and transportation are required. The pellets must be stored away from moisture, if the pellets absorb moisture, they will expand and become useless. The pellets are usually sealed in plastic bags. For most consumers, the packaging bag is an easy-to-carry size. Big bags weighing one ton can also be used for large equipment. It is stored directly in large silos and shipped to consumers in bulk.

  Biomass pellet production line is suitable for a wide range of materials, including sawdust, wood chips, bamboo chips, bark, branches, walnut shells, chestnut shells, cotton stalks, sesame stalks, corn stalks, sunflower stalks, soybean straws, rice husks, bagasse , Corn cob and other raw materials are crushed and extruded by wood pellet machine equipment to form rod-shaped fuel. The density of the fuel rod after extrusion is several to ten times higher than before.

  Zhengzhou Jiutian specializes in the production of complete sets of equipment for the biomass pellet production line. If you need it, please feel free to contact us.