Focus on heavy equipment
When the drying equipment is used daily, its maintenance should be enhanced, so that it will bring convenience to our use and improve its working efficiency. So what are the maintenance methods of the river sand dryer?
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the injected lubricating oil is required to be clean, and it must be well carried out. seal.
2. The newly installed tires are prone to loosening and should be checked frequently.
3. Pay attention to whether the work of each part of the machine is normal.
4. Pay attention to check the wear degree of the wear-resistant parts, and pay attention to replace the worn parts at any time.
5. On the bottom frame plane of the movable device, dust and other objects should be removed to prevent the movable bearing from moving on the bottom frame when the machine encounters materials that cannot be broken, so as to avoid serious accidents.
6. When the oil temperature of the bearing rises, stop immediately to check the cause and troubleshoot it.
7. If there is an impact sound when the rotating gear is running, stop it immediately to check and troubleshoot it.
The daily maintenance of the river sand dryer is essential. The river sand dryer manufacturer can only maintain and maintain it on a regular basis, so as to reduce the failure rate of the equipment and prolong its service life.
Recently, the equipment for the continuous carbonization machine project cooperated by Inner Mongolia customers and Zhengzhou Jiutian has been installed and is about to be put into production.
Wood shavings are the most common animal bedding material due to their use in absorbency and odor control. However, the production process of shavings produces dust and grease, which can cause problems for animals. Therefore, the shavings must be dry to e
Recently, the coal slime dryer equipment customized by Zhengzhou Jiutian for customers in Yangquan, Shanxi was hoisted in the Jiutian workshop and will be shipped soon.
The steam rotary dryer is also called a tube dryer. The heat source is waste heat steam from power plants and boiler plants. Through technological transformation, it is converted into the temperature and heat energy required by the material. It has the ad