Focus on heavy equipment
The yield of fresh grass per mu of land such as alfalfa and ryegrass is only 2-5 tons. An 800-pound cow needs to eat 15-20 pounds of hay a day. Depending on the moisture content of fresh grass, a cow should eat at least 30-40 catties of fresh grass a day, which is 5.4-7.3 tons of fresh grass a year. Simply drying the forage in the sun has a long cycle, poor quality control, high site requirements, and high requirements for natural conditions. Therefore, more and more large-scale breeding plants or feed factories use professional forage dryers.
The pasture dryer adopts the low-temperature hot air rapid drying process, with the drum dryer as the carrier, and the three-layer rotary drum structure or the multi-layer copy board drying structure can be used. There is no limit to the daily output, and the dried pasture has bright color and good taste, which has a positive effect on promoting the feeding of livestock.
The forage dryer can be equipped with a forage pellet machine later, which is used to make the dried forage into pellet feed. The cost is low and it is suitable for large-scale forage pellet feed production needs. If you are interested in forage dryer, please feel free to contact us.
Recently, the equipment for the continuous carbonization machine project cooperated by Inner Mongolia customers and Zhengzhou Jiutian has been installed and is about to be put into production.
Wood shavings are the most common animal bedding material due to their use in absorbency and odor control. However, the production process of shavings produces dust and grease, which can cause problems for animals. Therefore, the shavings must be dry to e
Recently, the coal slime dryer equipment customized by Zhengzhou Jiutian for customers in Yangquan, Shanxi was hoisted in the Jiutian workshop and will be shipped soon.
The steam rotary dryer is also called a tube dryer. The heat source is waste heat steam from power plants and boiler plants. Through technological transformation, it is converted into the temperature and heat energy required by the material. It has the ad