The pasture dryer can effectively dehydrate and dry high-humidity and high-viscosity materials, such as pasture, alfalfa, sweet elephant grass, straw and other materials. The correct operation and maintenance of the equipment can ensure the smooth production of the forage dryer equipment, as well as the durability of the equipment. So, how to use the forage dryer correctly?

  1. For the newly installed pasture dryer, it is necessary to run the equipment with no load before it is put into official use. Its purpose is to check for problems during the operation of the device. If there is a problem, it can be solved in time. Only when there are no problems can we move on to the next link.

  2. After there is no problem with no-load operation, it is necessary to tighten the bolts of all parts of the forage dryer equipment again, check whether the lubricating oil of the parts is insufficient, and then carry out the trial operation of the equipment.

  3. The rated work of the trial operation of the forage dryer equipment shall not exceed about 80% of the normal operation, so as to avoid overheating caused by the long-term operation of the equipment. If there is no problem in the trial operation, you can enter the formal operation link.

  4. Before entering the official operation of the forage dryer, it is necessary to ignite the hot air blower for preheating, and then start the forage dryer at the same time. Never heat the hay dryer without rotating it. Its purpose is to prevent bending of the equipment cylinder due to localized heating.

  5. According to the preheating of the pasture dryer, start adding materials to the dryer, and then gradually increase the feeding amount according to the moisture content of the dried materials. In general, preheating inside a forage dryer is a specific process that operators should always be aware of. It should be noted that when the heat is transferred to the inside of the forage dryer barrel, too much heat should not be suddenly transferred to prevent uneven heating of the equipment.

  6. When transporting the material to the pasture dryer, it is necessary to maintain an appropriate and uniform feeding speed according to the moisture content, viscosity and other conditions of the material. In order to ensure sufficient heat to dry the material and ensure the quality of the dry material.

  7. Forage grass will produce a lot of exhaust gas during the drying process, which must be filtered and purified by dust removal equipment before it can be discharged. The operator needs to pay attention to the temperature of the exhaust gas. If the temperature is too high, it will have a certain impact on the dust removal equipment. Once this happens, the operator needs to check and solve the problem in time.

  8. During the shutdown period, the feeding must be stopped first, and then the heating hot blast stove must be stopped after all the materials in the forage dryer are dried and discharged.

  The above content is about how to use the grass dryer correctly. If you have any questions about pasture dryer equipment, please feel free to contact us.