Focus on heavy equipment
Focus on heavy equipment
The spin flash dryer is composed of air filter, blower, rotating flash host, feeder, cyclone separator, induced draft fan, control cabinet, etc. When the flash dryer is in operation, some materials with excessive viscosity and humidity will simply constitute the blockage of the equipment, which will bring great difficulties and influence to the production, reduce the operation efficiency, and cause economic losses for the enterprise.
According to the characteristics of the material, the filter needs to be selected in the drying operation. The filter is a device for filtering impurities in the liquid. The selection of the filter screen should be compatible with the inlet channel and aperture of the flash dryer. Generally, the mesh diameter of the filter should be 0.2 times that of the inlet channel or aperture of the flash dryer; install the camera number equipment on the machine. The drying status is transmitted to the supervisory machine in the control room in time, so that the operator can grasp the drying status in time, find the fault in time, and prepare to deal with the problem immediately.
The flash dryer has the dual functions of an airflow flash dryer and a pressure flash dryer. Use compressed air for drying when the pressure of the high-pressure pump has not reached the drying pressure when driving, and stop the compressed air when the high-pressure pump is in normal operation. In the same way, if the flash dryer is drying for some reason, it is not only always used to avoid wet material.
If you want to know more techinical information about spin flash dryer, please feel free to contact us.
Coffee grounds are the residue produced after brewing coffee. More than 2 billion cups of coffee are consumed worldwide every day, and most of the coffee grounds are discarded as garbage. The decomposition of coffee grounds releases methane into the atmos
Livestock farms generate a large amount of pollutants every day, including cow dung, urine, and other contaminants, with a moisture content ranging from 85% to 90%. These pollutants contain a substantial amount of undigested organic matter and insect eggs
Empty fruit bunches (EFB) are fibrous agricultural waste left over from palm oil extraction and can be processed into biomass fuel. The initial moisture content of palm fruit bunches is usually high (55-65%), and the moisture needs to be reduced to 15% be
Sawdust pellets are a type of biomass fuel with high density and high calorific value, it can replace traditional fossil fuels, reduce pollution, and achieve resource recycling. To produce sawdust pellets, drying is usually an indispensable step, because
