Focus on heavy equipment
How to realize the reuse of waste distiller's grains, the distiller's grain dryer will help you! With the continuous development of lees dryer technology, our equipment is becoming more and more perfect.

The technological solutions of beer lees dryer and liquor lees dryer are tailored to the most scientific treatment solutions for different materials and application values. Jiutian distiller’s lees dryer is mainly composed of heat source, feeder, distiller’s lees dryer, unloader, dust collector and power distribution cabinet. The wet distiller’s lees is sent to the drying drum, and the cylinder is equipped with a plurality of spiral-shaped copy plates. , Through the rotation of the cylinder to drive the copying board to continuously raise the distiller’s grains. The beating device on the cylinder wall prevents the material from adhering to the cylinder wall and the copying board. The raised materials are fully in contact with the hot air flow introduced by the induced draft system. It accelerates the heat and mass transfer of drying, evaporates water, completes the drying, and discharges from the discharge port. The mechanization, industrialization and automation of the drying process of distiller’s grains have been realized.
The distiller's lees dryer equipment must be maintained frequently, and problems that are difficult for users to solve sometimes occur during use. Some wearing parts are not universal. Whether the factory can permanently provide users with technical consultation and spare parts supply, users must consider when selecting equipment manufacturers, and other users of drying equipment manufacturers should be asked to understand the reputation of the company.
Coffee grounds are the residue produced after brewing coffee. More than 2 billion cups of coffee are consumed worldwide every day, and most of the coffee grounds are discarded as garbage. The decomposition of coffee grounds releases methane into the atmos
Livestock farms generate a large amount of pollutants every day, including cow dung, urine, and other contaminants, with a moisture content ranging from 85% to 90%. These pollutants contain a substantial amount of undigested organic matter and insect eggs
Empty fruit bunches (EFB) are fibrous agricultural waste left over from palm oil extraction and can be processed into biomass fuel. The initial moisture content of palm fruit bunches is usually high (55-65%), and the moisture needs to be reduced to 15% be
Sawdust pellets are a type of biomass fuel with high density and high calorific value, it can replace traditional fossil fuels, reduce pollution, and achieve resource recycling. To produce sawdust pellets, drying is usually an indispensable step, because