Focus on heavy equipment
Lignite is a low-grade coal with low energy density and relatively high moisture content, generally above 30%. Therefore, if lignite is to be used as fuel, it must be dried first. Then, the lignite dryer has become an indispensable equipment.

Working principle: The lignite dryer consists of a cylindrical structure. The cylinder is placed horizontally, with one end slightly higher and the other end slightly lower. When the equipment is working, the moist lignite is sent to the hopper through a belt conveyor or bucket elevator. Then the lignite enters the inside of the dryer from the higher end of the dryer. The dryer keeps rotating, and the lignite in the cylinder is brought to a high place and then falls down as it rotates. There is a lifting plate on the inner wall of the cylinder. The purpose is to bring the lignite to a high place and scatter it evenly, thereby increasing the contact area between the lignite and the air, so as to achieve the purpose of drying the lignite more quickly.
The lignite dryer has a very wide range of applications and is mainly used for drying low-grade coal such as lignite and peat to improve its utilization value. If you are interested in our equipment, please contact us.
Pulp is the raw material for making paper and cardboard, which is a fiber material made from plants (such as wood, cotton, agricultural waste) or recycled paper, and is formed by decomposing and mixing with water. Wet pulp is a fiber suspension with high
In sugarcane sugar factories, after extracting sugar from sugarcane juice, the remaining sugarcane bagasse can be used as fuel for power plants or boilers. Sugarcane bagasse usually contains 48% to 52% moisture, and due to the energy consumption required
As ethanol production increases, the supply of distiller's grains also increases. Distilled grains are waste produced by distilleries after alcohol production, containing a high amount of fiber and protein, with protein content ranging from 25-35%. After
The steam tube rotary dryer is a type of rotary dryer, which consists of a tube heat exchanger, inlet and outlet center tubes, rotating drum, feeding and discharging devices, induced draft fan, dust collector, and distribution cabinet. Unlike traditional