Large-scale sludge drum dryer equipment can be used for textile sludge, printing and dyeing sludge, chemical sludge, electroplating sludge, metal sludge and other high-humidity and high-viscosity sludge. As a professional large-scale dryer, large-scale sludge drum dryer equipment has become an important prerequisite for comprehensive utilization of sludge. So, how to ensure the drying quality of large sludge drum dryer equipment?

  1. Ensure the quality of equipment installation

  The installation site of large sludge drum dryer equipment should be flat, and the equipment should be fixed on the cement foundation during installation. If the workplace is often changed, the large sludge drum dryer equipment can be installed on a frame made of angle steel. Measure the position of the equipment before installation to ensure that it is placed horizontally during installation, and fasten the anchor bolts, bolts and other parts to avoid loosening.

  2. Choose a reliable manufacturer

  The appearance of large sludge tumble dryers is very similar, but in fact the internal structure and drying process are different, and the prices vary greatly. In this case, customers can choose a reputable large sludge dryer equipment manufacturer. The equipment quality and after-sales service produced by these manufacturers are relatively guaranteed. A good manufacturer can customize drying technology solutions for customers according to their own material characteristics and actual production requirements, and make reasonable quotations for customers while ensuring the quality and performance of large sludge drum dryer equipment.

  3. Properly adjust the temperature and air volume

  The working principle of large sludge drum dryer equipment is heat transfer. Therefore, the control of equipment temperature and air volume is one of the key factors affecting the drying quality of large sludge drum dryers. Parameters such as temperature and air volume should be adjusted gradually, and should not be adjusted too much at one time, and the temperature and air volume should be adjusted within an appropriate range. It is inappropriate for the parameter to be too large or too small. If the air volume is too large, the hot air will be exhausted from the cylinder before it fully contacts the wet mud, and the heat loss will increase. If the air volume is too small, the water cannot evaporate, and there will be problems such as uneven drying and substandard water content.

  4. Choose a good equipment structure and process

  The drying quality of large-scale sludge drum dryer equipment with reasonable structure, mature technology, stable operation and high output should be much higher than that of equipment with backward technology and structure. Unqualified large sludge drum dryers can not only meet the requirements of production efficiency, but also affect the drying quality of sludge.

  Zhengzhou Jiutian is a professional sludge drum dryer manufacturer with more than 20 years of experience. If you need it, please contact us.