Focus on heavy equipment
Sugarcane is one of the main raw materials for sugar production. The bagasse left over after sugar squeezing is mainly used for the following purposes:
1. For feed: Bagasse can be turned into feed. After the bagasse is recovered, the bagasse and urea can be mixed, then fermented, and finally dried and ground into powder. It can be used as feed for raising cattle, sheep, pigs, etc., because bagasse contains high sugar and nutrients.
2. Fuel production: Bagasse can be used to produce fuel, alcohol, etc. The cellulose in bagasse can be converted into sugar, and then made into alcohol, alcohol, fuel, etc.
3. Papermaking: Bagasse can be used to make paper and board. It can reduce felling of trees and protect the environment; it can also make disposable utensils green and environmentally friendly tableware.
Bagasse dryer is the main equipment for bagasse reuse. What are its characteristics?

1. The three-channel (three-return) cylinder of the bagasse dryer has good insulation performance, and the heat loss through the cylinder is only 3%.
2. The bagasse dryer has no special requirements for the natural conditions of the installation site, including average temperature and average relative humidity. Compared with the traditional three-pass bagasse dryer, it can save 15% of the area.
3. The bagasse dryer is easy to operate, and all important technical parameters are visualized and clear at a glance, without too much experience in operation and management.
Zhengzhou Jiutian specializes in the production of bagasse dryers and has rich experience. If you need it, please feel free to contact us.
Coconut coir is a brown organic medium produced during the processing of coconut shell. It has good water retention and breathability, so it is ofter used as a soilless cultivation medium. Freshly processed coconut coir has a high moisture content and mus
In industrial production, industrial drying system is widely used for material moisture reduction, improving production efficiency, it play an important role in large-scale production and ensuring product quality. Among the various drying processes of ind
Straw is waste material left in the field after crop harvesting. At present, the most common way to use straw is to process it into fuel, for example, turn straw into biomass pellets or charcoal. How to turn straw into pellets, and what are the steps?
Sweet potato residue is a by-product in the processing of sweet potato starch, because of its high nutritional value, it is widely used in feed, food processing, and organic fertilizer industries. Sweet potato residue has a high moisture content, in order